Frequently asked questions (FAQ) on Crafty.
Last modified on 1996.06.17
Send corrections/additions/comments to:
Anil Mungal (amungal@vnet.ibm.com)

-----
[1] What is Crafty?
[1.1] What platforms can Crafty run on?
[1.2] What is Crafty's rating/strength?
[1.3] Where can I get Crafty?
[1.4] How do I build Crafty?
[1.5] How do I build Crafty's Book?
[1.6] How can I maximize Crafty's performance?
[1.7] What are "tablebases" and how do I use 'em?
[1.8] How can I get a graphical interface with Crafty?
[1.9] How can I use both Crafty and XBoard to analyze positions/games?
-----
[1] What is Crafty?

Crafty is a chess program written by Bob Hyatt (hyatt@cis.uab.edu).
It is modeled after Cray Blitz (also written by Bob).

Crafty has the following features:
- written in C
- can be compiled with the GNU C compiler on various platforms
- has a customizable opening book
- supports tablebases (Steven Edward's endgame database)
- text interface

Crafty is a work in progress, and is frequently updated/enhanced by Bob.
-----
[1.1] What platforms can Crafty run on?

The decision to write Crafty so that it compiles with the GNU C compiler
allows it to run on many platforms without the hassle of porting.
(Thanks Bob)

Currently Crafty runs on:

- DEC alpha running OSF/1-Digital Unix
- any Cray-1 compatible architecture including XMP, YMP, C90, etc.
- HP workstation running HP_UX operating system (unix)
- PC running DOS, Windows, or OS/2 Warp, using DJGPP port of gcc to compile
- RS/6000 running AIX (unix)
- Sun SparcStation running Solaris (SYSV/R4) Unix
- Sun SparcStation running SunOX (BSD) Unix
- Any architecture running the Linux operating system
- Microsoft Win95/WinNT, when compiled with Microsoft Visual C++
- Macintosh and other MacOS-compatible computers

Storage requirements range from 1Mb (small book and no tablebase) to 60Mb
(largest book and no tablebases) to 300Mb (largest book and all tablebases).
-----
[1.2] What is Crafty's rating/strength?

Crafty's strength is directly dependant upon processor speed, hash table size,
size and content of it's opening book, and it's use of an endgame database.
Versions of Crafty running on ICC and FICS have ratings around 2500-2700.
This does not necessarily mean that Crafty will perform at this level
under tournament conditions.

Crafty's computational power in nodes/sec has been measured as follows:

  Platform                                      Nodes/sec
  --------                                      ---------
  DEC alpha running OSF/1-Digital Unix             75,000
  Cray-1 XMP, YMP, C90, etc.                       ??????
  HP workstation running HP_UX operating system    35,000
  80X86 architecture running LINUX (unix)          30,000 (P5/133)
  Pentium 100 PC                                   24,000
  Pentium Pro 200 PC                               75,000
  RS/6000 running AIX (unix)                       ??????
  Sun SparcStation running Solaris (SYSV/R4) Unix  30,000 (Sparc-20)

According to the Louget Chess test, Crafty has been given the following ratings:

		Platform  Hash table  Louget rating (comparable to FIDE rating)
		========  ==========  =============
Crafty v9.21	PP200	     56 MB	   2395
Crafty v9.21	PP150	     56 MB	   2365
Crafty v9.21	P133	     14 MB	   2305
Crafty v9.21	P90	      7 MB	   2235

Where the platforms were:
PP200 = Pentium Pro 200 Mhz, 16+256KB internal caches, Aurora Intel motherboard
PP150 = Pentium Pro 150 Mhz, 16+256KB internal caches, Asustek motherboard
P133 = Pentium 133 Mhz, 256 KB pipeline burst synchronous L2 cache
P90 = Pentium 90 Mhz, 256 KB asynchronous cache (Intel Zappa, Triton Chipset)

For more info on the Louget Chess test, you can contact:
Frederic Louguet (louguet@worldnet.net)
----
[1.3] Where can I get Crafty?

You can get Crafty by anonymous FTP at:  ftp://news.cis.uab.edu/pub/hyatt

Here is a description of the files that you will probably see.

read.me       : Read me file that Bob updates
crafty.exe    : PC DOS executable. (needs DPMI)
craftyt.exe   : PC DOS executable with tablebases support. (needs DPMI)
crafty.faq    : this file
crafty.linux  : Linux executable
crafty.sun    : Sun Sparc-20 executable
crafty.zip    : Crafty source code
crafty.tar.Z  : Crafty source code
crafty.tar.gz : Crafty source code
cwsdpmi.exe   : DPMI provider
large1.zip    : Large PGN file used to create an opening book (1/4)
large2.zip    : Large PGN file used to create an opening book (2/4)
large3.zip    : Large PGN file used to create an opening book (3/4)
large4.zip    : Large PGN file used to create an opening book (4/4)
medium.zip    : Medium PGN file used to create an opening book
small.zip     : Small PGN file used to create an opening book
start.zip     : Tiny PGN file used to create an opening book
probs.Z       : A test suite of chess problems
wcrafty.exe   : Windows executable.
wcraftyt.exe  : Windows executable with tablebases support.

The Macintosh port of Crafty is available from <ftp://ftp.limunltd.com/crafty/>.
The Mac versions are supported from <http://www.limunltd.com/crafty/>.

-----
[1.4] How do I build Crafty?

If you wish to build Crafty for yourself, you need a copy of the source
and the GNU C compiler (or the djgpp compiler for DOS) to compile.

   a) Unzip/uncompress the source code.

   b) Follow the instructions in the Makefile.  You will probably have to:
      - comment/uncomment sections based on your hardware platform.
      - edit the directory paths.
      - add whatever optimization flags that you want.

   c) type make

-----
[1.5] How do I build Crafty's Book?

You need an executable version of Crafty and a PGN file to build it's book.
Choose between large (unzip large1.zip, large2.zip, large3.zip, large4.zip
and append them into one file), medium (unzip medium.zip), or small.zip
(unzip small.zip).
Large produces a 90Mb-60Mb opening database with 100K GM games; medium produces
a 30Mb database, and small will produce a 1Mb database. Note that you will
need at least double this space to create the files, since temporary files
are written to disk, and then later deleted.  Use the following commands to
build the book:

	crafty
	book create <filename> 60
	quit

<filename> should be replaced by the PGN filename that is created when you unzip
the book file of your choice.

Start.zip contains a small file that is used to create books.bin.
books.bin is created as follows:

	crafty
	books create start.pgn 60
	quit

This file contains suggested openings that fit Crafty's "open" style of
play better.  You can edit/modify this at will, and it takes a fraction of
a second to re-build after modification, so the big book file can be left
alone.

Note that the "60" is arbitrary, and is used to cut book lines off at roughly
60 plies.  You "can" say 500, so that the entire games will be stored,
but you need even more disk space.  You can also reduce this number to 30
(15 moves for each side) to conserve disk space as needed, since the book
will contain far fewer positions.
-----
[1.6] How can I maximize Crafty's performance?

   a) Compile with different combinations of the following options:
      -DCOMPACT_ATTACKS, and -DUSE_SPLIT_SHIFTS.  Then check the performance
      of Crafty.  The best test is to simply let it search to a fixed depth
      (say sd=8 for example) from the opening position and pick the compiler
      /optimizer options that minimize this time.  Pick SD=n so that the search
      takes at least 2 minutes.

   b) Increase the size of hash and hashp based on the following
      observations:
      - hash is more important that hashp.  the only guidance is that
        you don't want to make hash so large things slow down due to
        excessive paging or swapping.
      - there's a compile option -DFAST.  if you use this, crafty won't
        report any hashing statistics, making it harder to decide when
        to make things bigger.
-----
[1.7] What are tablebases and how do I use 'em?

tablebases are endgame databases distributed freely by Steven Edwards (former
sje@mv.mv.com, actual email unknown).  If you are downloading an executable,
for dos you'll want craftyt.exe, and for Win95/WinNT, you'll want wcraftyt.exe.
If you compile your own, -DTABLEBASES will do the trick.

Once you have an executable that expects tablebases, you typically
put them in a sub-directory TB that should be in the directory where
you normally run crafty.  You can change this by editing the Makefile
and changing TBDIR to point to where you want 'em.

Next, you need the tablebase files.  These are available from chess.onenet.net
and other ftp sites.  The files are named like this:  KBNK.tbb and KBNK.tbw
for the KBN vs K tablebases.  On some ftp machines the "." is replaced by a
"_".  after downloading them, rename them to replace the _ by . or crafty
will not recognize them.  These files are also available from the primary
Crafty site ftp.cis.uab/edu/pub/hyatt/TB.

The complete set takes about 260Mb, for all 4-man endings.  We are working
on new ones for frequently encountered endings like KRP vs KR.  These will
be made available as they are completed.  There are 10 5-piece files now
available, KRPKR, KRNKR, KRBKR, KRRKR and KQRKR, where each has a .tbb
and .tbw pair.  These files require about 500mb zipped, but will expand
to about 2.3 gigabytes when unzipped.  So be prepared for a large disk
space requirement.

Note that these databases are "mate in n" type databases, so you'll see
some interesting mate announcements from Crafty, with Mate in 30 a very
common occurrence.  :)

Endgame tablebases are available for all three-piece and almost all four-piece
endgames. Because of the way chess programs work, you should install all of the
tablebases with the same number of pieces. Therefore, you can either:
   * forget about the tablebases (0 MB to ftp, 0 MB on disk)
   * install one side of every three-piece tablebase (32K to ftp, 208K on disk)
   * install both sides of every three-piece tablebase (69K to ftp, 416K on disk)
   * install one side of every three- and four-piece tablebase (14 MB to ftp, 123 MB on disk)
   * install both sides of every three- and four-piece tablebase (34 MB to ftp, 245 MB on disk)

You can also connect to a Nalimov Tablebase Webservice containing 7 GB of all 3,4 and 5 man endgames. See

http://www.lokasoft.nl/uk/tbapi.htm

-----
[1.8] How can I get a graphical interface with Crafty?

On Unix systems, you can use XBoard with Crafty.  On Windows systems, you
can use WinBoard.  For more information on XBoard and WinBoard, check out:
http://www.research.digital.com/SRC/personal/Tim_Mann/chess.html
-----
[1.9] How can I use both Crafty and XBoard to analyze positions/games?

It is now possible to use XBoard and Crafty together to perform
interactive analysis of positions and stored (PGN, etc.) games.

To do this, you need a recent version of Crafty (12.3 or up) and
xboard/winboard version 3.6.1 or later.

For instructions, see the winboard/xboard faq, which explains how to use
this powerful and interesting facility.
-----
** End of Crafty FAQ **


